BMC Roadmachine

Generalities
14
Downtube covers and rubber plugs
Article numbers:
30000713 Cable guide - No 27
Includes covers and plug
213675 Di2 plug Kit - No 1
Diam 8mm, for Di2 wires (set of 10)
212492 Di2 plug Kit - No 3
Blind plugs diam6.0 (set of 10)
300709 Di2 plug Kit - No 4
Down tube side plug
301103 Di2 plug Kit - No 6
Blind plugs diam 8mm (set of 10)
Stems
The Roadmachine 01 and Roadmachine 01 X frameset is optimized for full cable integration. It’s only
compatible with ICS type cockpits and stems.
The Roadmachine and Roadmachine X frameset is designed for more versatility and is compatible
with different types of cable routing:
• with flat steerer fork: compatible with ICS type cockpits and stem, internal brake cable routing,
external shift cable routing.
• with round steerer fork: compatible with any standard 1”1/8 stem, external brake and shift cable
routing.
Roadmachine 01
Roadmachine 01 X
(flat steerer fork)
Roadmachine
Roadmachine X
(flat steerer fork)
Roadmachine
(round steerer fork)
ICS 2.0 standard integrated cables
 
possible with
external cable routing
ICS 1.0 standard integrated cables
 
possible with
external cable routing
1”1/8 stems external cables
⊖ ⊖

ICS1.0 is compatible with bikes equiped with a flat steerer fork. However, you will need to replace
the top cone and spacers to ICS1.0 versions.
You could run a full one piece cockpit such as the ICS Carbon Evo on a non intergrated Roadma-
chine as the 1”1/8 stem interface is compatible with the 1”/8 round steerer tube. The cables will be
routed externally for both the framset and the cockpit.