BMC Roadmachine

Detailed assembly instructions
38
• For Roadmachine, push the appropriate rubber plug in the downtube openings.
• Option A: “ICS full integrated” uses a down tube side plug that fits both holes
• Option B: “external” uses a cylindrical plug that fits in the upper hole of the down tube
Push in the appropriate rubber plug
ICS Integrated External
Roadmachine
• For Roadmachine, place the appropriate cover on the downtube opening.
• Option A: “ICS full integrated” uses a blind cover
• Option B: “external” uses a cylindrical plug that fits in the upper hole of the down tu
Place the appropriate cover & bolts
ICS Integrated External
Roadmachine
10
2 Nm
• Tighten the M3x12 bolt to 2 Nm using a Torx 10 wrench.