BMPRO JAYCOMMAND - PAIRING TO THE NODE

For additional support please refer to FAQs & Troubleshooting.
When your smartphone is paired with the NODE, the Bluetooth icon is displayed
on the JAYCOMMAND APP home screen.
PAIRING TO THE NODE
Pairing your smartphone to the NODE is done in three easy steps and the APP
will guide you through the process.
The NODE can be paired to a total of four devices.
CONGRATULATIONS,
YOU’RE CONNECTED!
1. Launch the APP on your phone and choose the device installed in your RV
2. Press the Page Navigation Button to navigate to the ‘Settings’ page
3. When “Pair Device” is highlighted press the OK function button and your
smartphone will begin pairing to the NODE.
2 3
1
FIGURE 4: Pairing to the NODE
14