BMPRO JAYCOMMAND Manual

GENERAL SETTINGS
The General Settings may be accessed by
selecting the Settings icon on the APP home
screen. Use the General Settings to:
• Check the Bluetooth Connection between
the NODE and smartphone
• Status settings allows for setting the Tire
pressure sensor under pressure and over
temperature limits
• Check the wireless battery of any installed
Smart Sensors
• Access a digital version of the
JAYCOMMAND Owner’s Manual
• Utilize the Motor Settings, which
depending on the level of controller
installed, can be used to set zero-point
calibration.
• About JAYCOMMAND : All about the
JAYCOMMAND system, NODE Firmware
version, JAYCOMMAND APP version, etc.
• Set your unit preferences for temperature
and pressure
• Diagnostics page shows faults against
individual pin.
UNIT CONVERSION
To change the unit of temperature, go to the
settings menu on the JAYCOMMAND APP
home screen and select Preferences.
From there, the unit of temperature can be
toggled between Celsius & Fahrenheit.
FIGURE 34:
General Settings Screen
FIGURE 35: Display Options
29

BMPRO JAYCOMMAND Specifications

General

Brand	BMPRO
Model	JAYCOMMAND
Category	Controller
Language	English