BMPRO JAYCOMMAND Manual

TEMPERATURE SENSOR
The JAYCOMMAND system is able to integrate with BLE
temperature sensors called SmartTemp. The user will be
able to pair a maximum of four temperature sensors.
PAIRING SMARTTEMP SENSORS
1. Go to the Status Screen and press the “Add” button
located in the Temperature tile.
2. A Pop-up will appear with pairing instructions.
Select the desired sensor name.
3. Press and hold the sensor power button until the light turns green.
4. Press the “Pair” button.
5. Once pairing is successful, the temperature level is displayed
along with its allocated name.
FIGURE 31:
SmartTemp Sensor
26

BMPRO JAYCOMMAND Specifications

General

Brand	BMPRO
Model	JAYCOMMAND
Category	Controller
Language	English