BMPRO JAYCOMMAND Manual

If pairing is unsuccessful, an error message will
appear. Press the “Retry” button to try again.
If the SmartSense sensor fails to pair:
• Bring the sensor closer to the NODE
• Check the sensor battery status.
UNPAIR SMARTSENSE PROPANE
Press the “Unpair” button and then choose
the bottle required to be unpaired, then press
“Done” to confirm the action
The tank will display “-“, if the valid pressure is
not received by the system.
• Quickly press the “Sync” button 6x times
quickly to wake
• Wait for the sensor to send the information
• Check the sensor battery status.
• Bring the sensor closer to the NODE
FIGURE 29: Pairing
the SmartSense
FIGURE 30: Unpair the
SmartSense
5.
7.
Refer to BATTERY REPLACEMENT on page 31
to check the battery status of the sensor and
for instructions on battery replacement.
25

BMPRO JAYCOMMAND Specifications

General

Brand	BMPRO
Model	JAYCOMMAND
Category	Controller
Language	English