8
Aim of this document
Aim of this document
The purpose of this manual is to provide the necessary information for the following operations:
– Installation and configuration of BMW Wallbox Pro charging stations.
Related documents
Owner’s Manual, Quick Start Guide, Installation Guide and information about BMW Service can be
downloaded at: http://www.bmwgroup.com/360electric/index.html.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
– To prevent overheating, only use a supply cable with a cross-section suitable for the rated current
used by the Wallbox Pro.
– Do not install the charging station if any damage is observed while unpacking or handling.
– Before charging vehicles from other manufacturers, trained and qualified personnel must always
check the electrical installation to insure that it meets the specifications/requirements of the
vehicle being charged.
– If the charging cable or connector is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid any hazard.
– Do not use this product with electric vehicles that require ventilation.
Failure to follow these instructions will result in death or serious injury.
To Next Page
Loading...
