Default values are generally compliant with network settings
– IP address: Wallbox Pro has a fixed IP address; the default value should be changed only if a
different fixed IP address is needed:
Note: the IP address immediately following this IP address is also reserved for internal use in the
Wallbox Pro
– For other non compliant network settings, the installer needs to have access to a computer
connected on the Local Area network to get the network parameters and put them in the
adequate zone of the screen
How to get these network settings?
Note: address of the DNS server IPv4 can also be found in the details section of the Local Area
connection of the PC
Windows 8
– Open the Apps screen
– Scroll to find the Windows System section
– Click on Command Prompt
– A window with a black background should be open. In this window, type ipconfig
– Press the return key
– Get the needed information: If there is an Ethernet connection and a wireless connection on the
computer, you can copy the Ethernet connection information: Subnet Mask, Default gateway, DNS
server
To Next Page
Loading...
