RATIO.pm6.5 - USA
Page 1.21
RATIO
BOGE – RATIO compressor control for screw compressors
1.6 Faults – General
General
The tables on the following pages give information on the possible causes of
operating faults and measures for their rectification.
ATTENTION!
Ensure that any work required to rectify faults is only carried out by trained
personnel or specialists.
Ensure that components which have a safety function are only set, repaired
or exchanged by BOGE Service!
Please contact BOGE-Service at the following telephone number, if you have
any questions.
770-874-1570
All data is stored in a memory module (EEPROM).
If a fault occurs while the data stored in the EEPROM is being read, the
control system will react as follows:
– The compressor is switched off.
– The following fault message appears in the display.
Automatic monitoring
of the control systems
To Next Page
Loading...
