Aufstellung.pm6.5 - USA
Page 3.1
Installation
BOGE Operating instructions for S 40-2...S 341 / SF 40-2...SF 220 series screw compressors
General
Please observe the generally accepted safety and accident prevention regu-
lations when transporting the compressor. BOGE accepts no liability for
damage caused by improper transport!!
CAUTION!
The compressor is delivered filled with oil.
Do not tilt during transport!
Transport possibilities
Forklift truck or lifting
carriage transport
Ensure that the forks grip
underneath the base frame
of the compressor.
Crane transport
Only use suitable transport slings having a
minimum length of approx. 315 in.
Position the slings at the ends underneath the
base frame of the compressor.
CAUTION!
Do not subject the safety cladding to force during transport.
Protect the compressor using wooden spacers (see arrows).
Remove the transport timbers.
3.1 Transport