Wartung.pm6.5 - USA
Page 5.20
Maintenance
BOGE Operating instructions for S 40-2...S 341 / SF 40-2...SF 220 series screw compressors
DANGER: Risk of injury!
Because a hot air-oil mixture will escape when checking the safety valve
with running compressor only trained personnel or specialists should carry
out this work!
Check: – After approx. 3000 operating hours,
however, at least once a year.
Check safety valve by opening the screw plug .
DANGER: Risk of injury!
Danger of burning due to hot oil!
Take extreme care when checking the safety valve with the compressor
running taking all safety measures into consideration. Wear eye protection.
A hot air-oil mixture escapes when opening!
– Open the threaded plug counterclockwise.
The compressed air escapes.
– Tighten the threaded plug by turning clockwise.
Checking
the safety valve
5.3 Regular maintenance work
Fig. 5.14: check safety valve
1
To Next Page
Loading...
Need help?
General
