Bogen 3000 Series User Manual

Bogen Communications
50 Spring Street
Ramsey, NJ 07446
201.934.8500 P.
201.934.9832 F.
www.bogen.com
User Level Programming
Setting the Time from the LCD Display
1) Type in the user level password (default is 1111) at the main screen to enter user level programming.
2) The display should read “Set Time?”, as displayed in Fig 2.1.
3) Press the YES/ENTER button.
4) Enter the time (in 24 hour mode) using the keypad. When completed, press the YES/ENTER button to confirm the selection.
5) To exit and return to the main screen, continue to press the NO/CANCEL button until the main screen appears.
Setting the Date from the LCD Display
1) Type in the user level password (default is 1111) at the main screen to enter user level programming.
2) Press the NO/CANCEL button until the display reads “Set Date” as shown in Fig 2.2.
3) Press the YES/ENTER button.
3) Type in the desired date using the MM/DD/YYYY format.
4) Press the YES/ENTER button to confirm the date.
5) To exit and return to the main screen, continue to press the NO/CANCEL button until the main screen appears.
Fig 2.1
Fig 2.2

Bogen 3000 Series Specifications

General

Brand	Bogen
Model	3000 Series
Category	Clock
Language	English