Bogen Communications
50 Spring Street
Ramsey, NJ 07446
201.934.8500 P.
201.934.9832 F.
www.bogen.com
User Level Programming
Setting 12/24 Hour Mode from the LCD Display
1) Type in the user level password (default is 1111) at the main screen to enter user level programming.
2) Press the NO/CANCEL button until the screen shows “Set 12/24 Hour Mode?” as shown in Fig 2.19.
3) Press the YES/ENTER button to enter the option.
4) Use the ↑ and ↓ buttons to scroll between “12 Hour Mode” and “24 Hour Mode”.
5) Press the YES/ENTER button to confirm your selection.
6) To exit and return to the main screen, continue to press the NO/CANCEL button until the main screen appears.
BELL Messaging from the LCD Display
1) Type in the user level password (default is 1111) at the main screen to enter user level programming.
2) Press the NO/CANCEL button until the display reads “BELL Messaging?” as shown in Fig 2.20.
3) Press the YES/ENTER button to enter the next screen. The display should read “Zone:01 BELL: On” as shown in Fig 2.21.
4) Use the ↑ and ↓ buttons to scroll through each zone.
5) Press the → button to alternate the BELL function on and off.
6) Repeat steps 4 and 5, as desired, for each zone.
7) Press the YES/ENTER button when finished.
8) To exit and return to the main screen, continue to press the NO/CANCEL button until the main screen appears.
Fig 2.19
Fig 2.20
Fig 2.21
To Next Page
Loading...
General