Bogen 3000 Series User Manual

Bogen Communications
50 Spring Street
Ramsey, NJ 07446
201.934.8500 P.
201.934.9832 F.
www.bogen.com
User Level Programming
Numeric Messaging from the LCD Display
1) Type in the user level password (default is 1111) at the main screen to enter user level programming.
2) Press the NO/CANCEL button until the display reads “Send Number Message?” as shown in Fig 2.22.
3) Press the YES/ENTER button to enter the next screen. The display should read “Enter Clock #?” as shown in Fig 2.23.
4) Press the YES/ENTER button to enter the next screen. Enter the clock number as shown in Fig 2.24.
5) Press the YES/ENTER button. The display should read “Zone: 00” as shown in Fig 2.25. Enter the zone number.
6) Press the YES/ENTER button to enter the next screen. The display should read “Message:0000” as shown in Fig 2.26.
7) Press the YES/ENTER button to confirm the selection.
8) To exit and return to the main screen, continue to press the NO/CANCEL button until the main screen appears.
Fig 2.22
Fig 2.23
Fig 2.24
Fig 2.25
Fig 2.26

Bogen 3000 Series Specifications

General

Brand	Bogen
Model	3000 Series
Category	Clock
Language	English