Bogen Communications
50 Spring Street
Ramsey, NJ 07446
201.934.8500 P.
201.934.9832 F.
www.bogen.com
Web Interface Programming
Individual Settings - BELL and Numeric Messaging
q
Send Number This field allows the user to designate which number will be sent to the corresponding digital slave clocks. It can be up to
four numeric digits.
w
Send Number to All Clocks This checkbox, when checked, will send the value in the Send Number box to all of the digital slave clocks,
regardless of zone or clock number when the Submit button is clicked.
e
Clock Number This field allows the user to enter the specific clock number to send the numeric message to. This is only applicable when
using the BCBD 2000 as a slave clock.
r
Zone Number This field allows the user to enter the zone number to send the numeric message to. This is only applicable when using the
BCBD 2000 as a slave clock.
t
Set Bell Indicator The checkboxes, when checked, will display BELL on the digital slave clock displays. When a zone is selected, every time
the relay closes, the message BELL will be sent to the digital slave clocks via 2 wire digital communication or RS485.
y
Submit This button, when clicked, will submit all information that has been selected.
u
Menu This button, when clicked, will bring the user back to the main menu.
q
w
e
r
t
y
u
To Next Page
Loading...
General