Maintenance every year
BOMAG54 BPR 35/60
Fig. 68
If the starter rope has been torn or the coil has
been turned back:
l Before assembling the rope turn the coil (2)
(Fig. 68) 5 revolutions in anti-clockwise direc-
tion and align the rope openings on coil and
housing (5) to match (A).
Fig. 69
l Secure the coil (2) (Fig. 69) against winding
up. For this purpose fix coil and housing (5)
with a cable strap (1).
l Loosen the knots in the starter rope at both
ends and remove the old starter rope.
l Thread in the new starter rope (3) and fix at
both ends with knots.
Fig. 70
Danger
!
Danger of injury!
Do not allow the starter handle to hit back, but
guide it back slowly.Do not let the starter han-
dle hit back, but guide it back.
l Remove the coil fixture and guide the starter
handle slowly back to initial position (Fig. 70).
l Pull the starter handle to check the function
and light movement of the recoil starter.
l Mount the recoil starter to the engine housing .
540251
2
5
A
20 mm
0.8 in
20 mm
0.8 in
540250
540252
Go to Discount-Equipment.com to order your parts
To Next Page
