Maintenance every year
BOMAG 57BPR 35/60
Fig. 78
Note
i
Lay a cloth down before loosening the venting
screw.
l Slacken the bleeding screw (Fig. 78).
l Wait until all air has escaped, then tighten the
bleeding screw.
Fig. 79
l Fill in hydraulic oil to approx. 40 mm (1.6 in)
below the edge of the filler opening (Fig. 79).
Fig. 80
l Screw in and tighten the plug (Fig. 80).
690193
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
