Bomag BPR 70/70 D - Checking Fuel Level and Refuelling

5.4 Checking the fuel level; topping up fuel
NOTICE!
Danger of engine damage!
– Monitor the entire refuelling process.
–
Contaminated fuel can cause malfunction or
even damage of the engine. If necessary, fill in
fuel through a screen filter.
– Use only fuel of the permitted specification
Ä Chapter 8.3.2 „Fuel“ on page 72.
Protective equipment:
n
W
orking clothes
n
Safety shoes
n
Protective gloves
1. Clean the area around the filling port.
2. Remove the cap and check the filling level visually
.
3. If necessary
, fill in fuel through a funnel with screen filter.
4. Close the cap.
If the fuel tank has been completely emptied or
when filling the fuel tank for the first time, the fuel
system must be bled before starting
Ä Chapter
8.2.2 „Bleeding the fuel system“ on page 70.
B-SYM-1069
Fig. 34
Fig. 35
Checks prior to start up – Checking the fuel level; topping up fuel
BPR 70/70 D
49
Go to Discount-Equipment.com to order your parts