Bomag BPR 70/70 D - Running-in Instructions

8.5 Running-in instructions
8.5.1
General
The following maintenance work must be performed when running
in new machines or overhauled engines.
8.5.2 After 25 operating hours
1.
Change the engine oil
Ä Chapter 8.9.3 „Changing engine oil
and oil filter element“ on page 86.
2.
Check the valve clearance, adjust if necessary
Ä Chapter
8.9.2 „Checking, adjusting the valve clearance“ on page 84.
3. Check engine and machine for leaks.
4. Retighten the fastening screws on air filter
, exhaust and other
attachments.
5. Retighten the bolted connections on the machine.
6.
Check the V
-belt
Ä Chapter 8.11.3 „Servicing the V-
belt“ on page 96.
7.
Check the oil level in the exciter shaft housing
Ä Chapter
8.11.4 „Checking the oil level in the exciter
housing“ on page 97.
Maintenance – Running-in instructions
BPR 70/70 D
76
Go to Discount-Equipment.com to order your parts