Bomag BPR 70/70 D - Checking and Cleaning the Water Separator

8.7.2 Checking and cleaning the water separator
The service intervals for the water separator
depend on the water content in the fuel and can
therefore not be determined precisely
.
After taking the engine into operation you should
check for signs of water and dirt initially every day.
Protective equipment:
n
W
orking clothes
n
Safety shoes
n
Protective gloves
1.
Park the machine safely
Ä Chapter 6.5 „Parking the machine
in secured condition“ on page 60.
2. Place the transparent container under the drain plug.
3. Loosen the drain plug and collect escaping fluid.
4. Drain the fuel of
f until there is no water left.
If the fuel tank has been completely emptied,
bleed the fuel system before starting.
Ä Chapter 8.2.2 „Bleeding the fuel
system“ on page 70
5. Screw the drain plug back on tightly
. Ensure leak tightness.
6. Dispose of collected fluid in line with environmental regula-
tions.
B-SYM-1075
Fig. 69
Fig. 70
Maintenance – Weekly
BPR 70/70 D
80
Go to Discount-Equipment.com to order your parts