7.
CAUTION!
Danger of eye injuries caused by particles
flying around!
– Wear your personal protective equipment
(safety gloves, protective working
clothes, goggles).
Blow the air filter out with dry compressed air (max. 5 bar
(73 psi)
) from inside to outside by moving the gun up and
down inside the element, until it is free of dust.
8. Examine the air filter with a torch for cracks and holes.
9. Replace the air filter if it is damaged.
10. Slide the air filter (2 ) carefully into the filter housing.
11. Check the sealing face (3) on the cover
.
12.
NOTICE!
Danger of engine damage!
– Ensure correct fit of cover and seal.
Close the cap (1).
Fig. 67
Fig. 68
Maintenance – Weekly
BPR 70/70 D
79
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
