Bomag BPR 70/70 D - 2-Year; 500-Hour Maintenance Tasks

8.10 Every 2 years / every 500 operating hours
8.10.1
Changing hydraulic oil and hydraulic oil filter
NOTICE!
Risk of damage!
– Perform the oil change when the hydraulic oil is
warm.
–
Use only hydraulic oil of the permitted specifi-
cation.
– Filling quantity:
Ä Chapter 8.4 „List of fuels and
lubricants“ on page 75.
Protective equipment:
n
W
orking clothes
n
Protective gloves
1.
Park the machine in secured condition
Ä Chapter 6.5
„Parking the machine in secured condition“ on page 60.
2. Clean the area around the hydraulic oil tank.
3. Unscrew the plug (1).
4. T
ake out the breather filter (3).
5. Replace and insert the breather filter with seal ring (2).
6. Replace the plug and screw it in tightly
.
7. Disassemble the connecting piece with the hydraulic lines.
Changing the breather filter
Fig. 94
Changing hydraulic oil and filter
Fig. 95
Maintenance – Every 2 years / every 500 operating hours
BPR 70/70 D
92
Go to Discount-Equipment.com to order your parts