Bomag BPR 70/70 D - Page 71

Protective equipment:
n
W
orking clothes
n
Safety shoes
n
Protective gloves
1. Allow the engine to cool down.
2. Check the engine oil level, top up if necessary.
The fuel tank must be full when bleeding.
3. Check the fuel level, top up if necessary.
4. Press the ventilation lever for approx. 15 seconds against the
spring.
ð
The engine is ready for starting.
If the engine does not start after
bleeding, contact our customer service
department.
Fig. 63
Maintenance – Preparations/concluding work
BPR 70/70 D
71
Go to Discount-Equipment.com to order your parts