Bomag BPR 70/70 D - Page 83

9. Check the centre distance (x) between the centrifugal clutch
(1) and the V-belt pulley (2).
ð
Nominal value: 418 ± 1 mm (16.5 ± 0.04 in)
If the centre distance is incorrect, contact
our customer service.
10. Fasten the guard (1), tightening torque: 15 Nm (11 ft·lbf).
11. Fasten the V
-belt guard (1).
8.9.1.1 Checking the frequency of the base plate
Keep feet and hands clear of the vibrating base plate.
CAUTION!
Danger of injury caused by uncontrolled
machine movement!
– Always hold on to a running machine.
–
Always keep an eye on a running machine.
B-692-0183
x
1
2
Fig. 76
Fig. 77
Fig. 78
Maintenance – Annually / every 250 operating hours
BPR 70/70 D
83
Go to Discount-Equipment.com to order your parts