Bomag BPR 70/70 D - Page 87

Protective equipment:
n
W
orking clothes
n
Protective gloves
n
Safety goggles
1.
Park the machine in secured condition
Ä Chapter 6.5
„Parking the machine in secured condition“ on page 60.
2. Clean the area around the dipstick and pull the dipstick out.
3. Clean the area around the drain hose.
WARNING!
Danger of burning on hot components!
– Wear your personal protective equipment (pro-
tective gloves, protective clothing).
–
Avoid touching hot components.
4. Unscrew the drain plug and collect any oil running out.
5. Clean the drain plug and screw it in, tightening torque:
20 Nm
(15 ft·lbf).
6. Clean the area around the cover
.
7. Unscrew the cover and change the oil filter element.
8. Clean the sealing face on the engine.
9. Insert the new filter oil filter element with the recess facing
downwards.
10. Check the seal ring on the cover for damage, replace if nec-
essary
.
11. Slightly lubricate the seal ring.
12. Screw the cap on.
Draining off engine oil
Fig. 84
Fig. 85
Changing the oil filter element
Fig. 86
Maintenance – Annually / every 250 operating hours
BPR 70/70 D
87
Go to Discount-Equipment.com to order your parts