Various accessories (e.g. mounting flanges, ...) and/or electric motors coupled to the gear unit,
may significantly alter the centre of gravity, thereby impairing the stability of the unit.
Type of special danger
Depending on the operating conditions, the outer surfaces of the gear unit may reach very high
temperatures. Serious burns hazard!
When draining out spent oil at the time of an oil change, beware of the risk of serious burns
caused by hot oil!
In the presence of breather plugs with relief valve, wait for the oil in the gear unit to cool before
opening the plug and pay attention to the possible projection of jets of oil during transportation,
lifting, installation, adjustment, operation, cleaning, maintenance, repair, dismantling and
scrapping.
Wait for the gear unit to cool before inspecting it.
8
To Next Page
Loading...
Need help?
General
