1.4 REQUESTING TECHNICAL ASSISTANCE
For any technical service needs, contact the Manufacturer’
s sales network, quoting the information on
the unit’s nameplate, the approximate hours of service and the type of defect.
1.5 MANUFACTURER’S LIABILITY
The Manufacturer declines all liability for cases of:
use of the gear unit in violation of local laws on safety and accident prevention at work.
incorrect installation, disregard or incorrect application of the instructions provided in this
manual.
incorrect or defective power supply (gearmotors).
modifications or tampering.
work done on the unit by unqualified or unsuitable persons.
The safety of the gear unit also depends on scrupulous observance of the instructions given in this
manual, in particular:
always operate the unit within its operating limits.
diligently observe the routine maintenance schedule.
only authorise trained operators to inspect and service the unit.
use only original spare parts.
the configurations given in the gear unit catalogue are the only ones permitted.
do not attempt to use the unit contrary to the instructions supplied.
the instructions given in this manual do not substitute but summarise the provisions of
applicable safety legislation.
5
To Next Page
Loading...
Need help?
General
