EasyManuals Logo

BONFIGLIOLI HDP Series Installation Use And Service Manual

BONFIGLIOLI HDP Series
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
4.3 STORAGE
Some recommendations for storing the gear unit are indicated below.
1.
Do not store the unit in excessively humid conditions or where it is exposed to the weather (do
not store outdoors).
2. Do not place the gear unit directly on the ground.
3.
Place the gear unit on a stable base and make sure that it is not subjected to accidental
displacement.
4.
Store the packaged gear unit (if allowed) in accordance with the instructions on the packaging
itself.
When the gear unit is stored temporarily outdoors it must be protected to ensure that
humidity and extraneous objects cannot penetrate to the interior.
Special environmental conditions to be taken into account during shipment (e.g. by sea) and
storage (climate, presence of termites or similar) must be defined and established in the contract of
purchase.
If the gear unit is stored for more than 6 months, the following additional precautions must be taken:
5.
Cover all machined external surfaces with a rustproofing product such as Shell Ensis or
equivalent product with similar properties and application range.
6. Fill the unit with lubricating oil.
For gear units equipped with a drywell seal system or equipped with labyrinth type non-
contacting
seals, consult the BONFIGLIOLI technical-sales service.
11

Table of Contents

Other manuals for BONFIGLIOLI HDP Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BONFIGLIOLI HDP Series and is the answer not in the manual?

BONFIGLIOLI HDP Series Specifications

General IconGeneral
BrandBONFIGLIOLI
ModelHDP Series
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals