Example of playing a macro: bypassing a zone
This example shows how to play macro 1 for bypassing zone 3
(see the example in Recording macros, page 33).
4 Enter your code and press [1] for three seconds.
The system beeps and the macro 1 is executed
automatically.
P If zone 3 was unbypassed before playing macro 1, it is
bypassed now.
P If zone 3 was bypassed before playing macro 1, it is
unbypassed now.
AMAX panel Macros | en 35
Bosch Sicherheitssysteme GmbH 2017.04 | 07 | F.01U.295.569
To Next Page
Loading...
