Domestic dialing
Domestic dialing alarm
When a zone tamper or zone alarm is activated, the control
panel can dial a phone number of a contact person through the
onboard voice dialer module. A maximum of four numbers can
be dialed by the control panel during an alarm.
Indication of Domestic Call Alarm:
Domestic call 1 (1 alarm tone or recorded voice message)
Domestic call 2 (2 alarm tone or recorded voice message)
Domestic call 3 (3 alarm tone or recorded voice message)
Domestic call 4 (4 alarm tone or recorded voice message)
The voice messages are recorded with A-Link Plus and are
transferred via A-Link Plus to the AMAX panel.
To enable/disable this function contact your installer.
Confirming the domestic call
All alarm events need acknowledgement. The transmission
sequence is repeated until the control panel receives an
acknowledgement tone. The control panel automatically closes
the line after 45 seconds if it can not detect the
acknowledgement tone and redial later.
4 Press any button between two acknowledgement tones to
confirm the alarm.
P The system beeps for two seconds and closes the line.
12
12.1
12.2
40 en | Domestic dialing AMAX panel
2017.04 | 07 | F.01U.295.569 Bosch Sicherheitssysteme GmbH
To Next Page
Loading...
