4. Enter your code + [3] [1] + [#] for bypassing zones (see
also Bypassing/unbypassing zones, page 29).
The STAY indicator flashes fast. The available zones are
shown. Unavailable zones are marked with an x.
5. Select zone 3 an press [*].
Zone 3 is checked.
6. Press [#] to confirm and to exit the bypass menu.
7. Press [#] for three seconds to end the recording of the
macro and to save it.
P The system beeps twice. The macro 1 for bypassing zone 3
is recorded. Zone 3 is bypassed.
Playing macros
How to play a macro
There are two methods to play a macro.
Method 1:
4 Enter your code and press the number on which the macro
is assigned for three seconds. (Possible numbers are 1, 2
and 3.)
P The system beeps and the operation which is assigned to
the macro is executed automatically.
Method 2 (Quick Play):
4 Press the number on which the macro is assigned for three
seconds. (Possible numbers are 1, 2 and 3.)
P The system beeps and the operation which is assigned to
the macro is executed automatically.
To enable/disable this function contact your installer.
Notice!
Please note that the play function has to be enabled/disabled
individually for every user. Please refer to Add/change user
codes, page 36.
9.2
34 en | Macros AMAX panel
2017.04 | 07 | F.01U.295.569 Bosch Sicherheitssysteme GmbH
To Next Page
Loading...
