One short beep every
minute
Fault tone, unacknowledged system
failure.
One short beep every two
seconds
Exit time started.
Continued sound – Last 10 seconds on exit time
– Keypad fault or tamper sound
(fault or tamper to be
acknowledged)
– Keypad alarm sound
Continuous 0.5 second
beep, stops for 0.5
seconds
Entry delay time (until alarm occurs
or area is disarmed)
Quick keypad operations instructions
The following table shows an overview of the quick keypad
operations and the corresponding user permissions. For
information on changing codes and defining user permission
levels, refer to Codes, page 36.
Function Command
Default code for user 1 =
2580
Default code for user 2 =
2581
D A B S M
2
M
1
I
N
Arm/Disarm
AWAY Arm [code] + [#] / [#] for 3 sec.
(quick arm)
√ √ √ √ √ √ √
AWAY Arm All
Areas (only on
master keypad)
[code] + [0] [0] + [#] √ √ √ √ √ √ √
2.5
12 en | Short information AMAX panel
2017.04 | 07 | F.01U.295.569 Bosch Sicherheitssysteme GmbH
To Next Page
Loading...
