ZONE (1-8)
Fast flash (0.25
seconds lights on/0.25
seconds lights off)
Zone was alarmed or is
in alarm status.
Slow flash (1 second
lights on/1 second
lights off)
Interior zone is in STAY
arm mode.
Or:
This zone is bypassed
or isolated in the
current area (area
keypad) / There is a
bypassed or isolated
zone in this area
(master keypad).
Only for LCD
Keypad
Indicator
Icons
Status Definition
on Area is disarmed.
The following table shows an overview and a description of the
keypad sound icons.
Sound Indicator
Definition
Short beep A keypad button has been pressed.
Short beep, followed by a
one-second beep
The requested operation is refused.
Incorrect operation signal.
Two short beeps The system accepted the code. The
system executed the requested
function.
AMAX panel Short information | en 11
Bosch Sicherheitssysteme GmbH 2017.04 | 07 | F.01U.295.569
To Next Page
Loading...
