Bosch AMAX 4000 - Page 10

Slow flash (1 second
lights on/1 second
lights off)
AC main power supply
failed.
FAULTS
on System fault, tamper,
bypassed zone or
isolated zone condition
is present and has been
viewed but not
restored yet.
Or:
System is in service
mode.
off System is in normal
status.
Flashes System fault, tamper,
bypassed zone or
isolated zone condition
must be acknowledged.
All icons Flashing No communication to
the keypad.
Only for LED/LCD
Keypad
Indicator
Icons
Status Definition
1 2 3 ….
on Zone is triggered.
off Zone is normal.
10 en | Short information AMAX panel
2017.04 | 07 | F.01U.295.569 Bosch Sicherheitssysteme GmbH