The available areas are shown. Already selected areas are
checked.
5. Use [▲] and [▼] to display all areas.
6. Enter the area number you wish to enable for the user or
enter [0] [0] if you want to enable all areas.
The enabled area is checked.
7. Repeat step 6 if you want to enable multiple areas for the
user.
8. Press [#].
The available macros are shown. Already selected macros
are checked.
9. Enter the macro number you wish to enable for the user.
The enabled macro is checked.
10. Repeat step 9 if you want to enable multiple areas for the
user.
11. Press [#].
12. Enter a (new) code with a default length of four digits. (A
code with five or six digits is also possible but has to be
enabled by the installer.)
13. Press [#].
14. Optionally enter a keyfob ID manually.
Or
Press and hold [*] for three seconds to switch to the
KEYFOB ID: AUTO menu.
Trigger the keyfob to give alarm once.
The keyfob ID will be entered automatically.
15. Press [#].
16. Optionally select the keyfob button 3 function.
17. Press [#].
P The system beeps twice. The new user code is added/
changed.
4 Press [-] twice to exit.
AMAX panel
Codes | en 37
Bosch Sicherheitssysteme GmbH 2017.04 | 07 | F.01U.295.569
To Next Page
Loading...
