Bosch AMAX 4000

To Next Page

To Previous Page

6. Press [#] to exit.

P The STAY and AWAY indicators are extinguished and the

FAULT indicator is lit.

Lit number

indicators

Description of the fault or tamper

First Secon

Third

1 Accessory module failure

1 1 Network/IP module 1 failure

1 1 1 - 2 Network/IP module 1 - 2 failure

1 2 Output expansion module failure

1 2 1 - 2 Output expansion module 1 – 2 fault

1 3 Input expansion module failure

1 3 1 - 6 Input expansion module 1 - 6 failure

1 4 Printer failure

1 4 1 Module DX4010 missing

1 4 2 Printer missing

1 4 3 Printer fault

1 5 RF receiver failure

1 5 1 RF receiver 1 fault

1 5 2 RF receiver 1 missing

1 5 3 RF receiver 1 jammed

1 6 RF sensor failure

1 6 1 RF sensor missing*

1 6 2 RF sensor fault*

AMAX panel Faults and tamper conditions | en 43

Bosch Sicherheitssysteme GmbH 2017.04 | 07 | F.01U.295.569

Bosch AMAX 4000 - Page 43