Bosch B8512G Program Entry Guide

164 en | User Configuration Control Panel
2017.03 | 09 | F.01U.303.998 Program Entry Guide Bosch Security Systems, Inc.
9.4.17 Cycle Door
Default:
Authority Levels 1, 2, 15: Enabled (E)
Authority Levels 3-14: Blank (-)
Selections:
– Blank(-): This function is not authorized for the user who is assigned this authority level.
– Enabled (E): This function is authorized for the user who is assigned this authority level.
This parameter allows the user with this authority level to cycle a door from any keypad
assigned to an area where the user has authority.
Press the keypad number keys [1 through 8] that correspond to the door number to cycle
doors. For example, pressing the 2 and the ENTER keys cycles door number 2, which is
indicated by "C" in the display.
RPS Menu Location
User Configuration > Authority Levels > Cycle Door
9.4.18 (Un)Lock door
Default:
Authority Levels 1, 2, 15: Enabled (E)
Authority Levels 3-14: Blank (-)
Selections:
– Blank(-): This function is not authorized for the user who is assigned this authority level.
– Enabled (E): This function is authorized for the user who is assigned this authority level.
Press the keypad number keys [1 through 8] that correspond to the door number to unlock/
relock doors. For example, pressing the 2 and the ENTER keys unlocks door number 2, which
is indicated by "U" in the display.
Authority Level 15 is reserved for the Service Passcode (User 0). You cannot change any
settings in the Authority Level 15 column.
RPS Menu Location
User Configuration > Authority Levels > (Un)Lock Door
9.4.19 Secure Door
Default:
Authority Levels 1, 15: Enabled (E)
Authority Levels 2-14: Blank (-)
Selections:
– Blank(-): This function is not authorized for the user who is assigned this authority level.
– Enabled (E): This function is authorized for the user who is assigned this authority level.
This parameter allows the user with this authority level to secure a door from any keypad
assigned to an area where the user has authority.
Press the keypad number keys [1 through 8] that correspond to the door number to secure/
unsecure doors. For example, pressing the 2 and the ENTER keys secures door number 2,
which is indicated by an "X" in the display.
Authority Level 15 is reserved for the Service Passcode (User 0). You cannot change any
settings in the Authority Level 15 column.
RPS Menu Location
User Configuration > Authority Levels > Secure Door

Bosch B8512G Specifications

General

Model	B8512G
Category	Control Panel
Power Supply	12 VDC
Series	G Series
Areas	8
PGM Outputs on Board	8
On-board Ethernet	Yes
Wireless Support	Yes
Manufacturer	Bosch
Input Voltage	16.5 VAC
Users	500
Communication Formats	IP, GSM, PSTN
Compatibility	Compatible with Bosch detectors, keypads, and communication modules