Control Panel Panel Wide Parameters | en 51
Bosch Security Systems, Inc. Program Entry Guide 2017.03 | 09 | F.01U.303.998
– Delete User
– User Code Change
– Area Watch
– Keyfob Assigned
– Keyfob Removed
– Change Level
To individually assign reports from the User Change category to a Route Group, click User
Change Reports, page 57 in the menu tree.
3.9.1 Fire Reports
Default:
Fire Reports
Route Group 1 Route Group 2 Route Group 3 Route Group 4
Fire Alarm Yes Yes Yes Yes
Fire Restoral (after Alarm) Yes Yes Yes No
Fire Missing Yes Yes Yes No
Fire Trouble Yes Yes Yes No
Fire Supervision Yes Yes Yes No
Fire Restoral (after
Trouble)
Yes Yes Yes No
Fire Cancel Yes Yes Yes No
Fire Supervision Missing Yes Yes Yes No
Fire Supervision Restoral Yes Yes Yes No
Selections:
– Yes - assign this report to the Route Group.
– No - do not assign this report to the Route Group.
RPS Menu Location
Panel Wide Parameters > Report Routing > Fire Reports.
3.9.2 Gas Reports
Default:
Gas Reports
Route Group 1 Route Group 2 Route Group 3 Route Group 4
Gas Alarm Yes Yes Yes Yes
Gas Restoral from Alarm Yes Yes Yes No
Gas Missing Yes Yes Yes No
Gas Trouble Yes Yes Yes No
Gas Supervision Yes Yes Yes No
Gas Restoral from Trouble Yes Yes Yes No
Gas Cancel Yes Yes Yes No
To Next Page
Loading...
Need help?
General
