Necessary spare part kits
1
to service a high-pressure injection valve :
Product name: Quantity:
Spare part kit HDEV5 1
Spare part kit HDEV6 1
Robert Bosch hold-down element if required
1)
The configuration of the spare part kits varies depending on the vehicle/manufacturer. For more information
on installation and removal, and spare parts kits, refer to the ESI[tronic].
Positions of the combustion chamber sealing ring on the valve tip
1
:
HDEV5 HDEV6
1)
Use only the HDEV5/6 tool kit to repair high-pressure injection valves marked with a hook.
Reference values:
Calibration sleeve: Calibration diameter:
(Combustion chamber sealing
ring)
Spare part number:
(Combustion chamber sealing ring)
Calibration sleeve HDEV5 7.98 mm ± 0.08
7.95 mm ± 0.08
F00VH05101 (black, short) Ø 7.98 mm
F00VH05102 (black, long) Ø 7.95 mm
F00VH05003 (white) Ø 7.95 mm
Calibration sleeve HDEV6 6.45 mm ± 0.08 F00VH05206/208 Ø 6.45 mm
Special sleeve
1
6.30 mm ± 0.08 F00VH05205 Ø 6.35 mm
1)
Do not use the HDEV5/6 tool kit.
en-gb | 8 | BTG 5120
1 689 989 487 | 2020-10-01 Robert Bosch GmbH
Franz-Öchsle-Straße 4
73208 Plochingen
Germany
To Next Page
Loading...
