NL Before first use
kBefore first use
Switch off the appliance after the specified time with
the on/off . button .
When the cooking compartment has cooled down,
clean the smooth surfaces with soapy water and a
cleaning cloth.
For the first use kBefore you can use your new appliance, you must
make a few settings: In addition, clean the interior and
the accessories.
Cleaning accessories
First use
Clean the accessories thoroughly with soapy water
and a cleaning cloth or soft brush.
After the power connection or a power failure, the
settings for the first use appear on the display. It may
take a few seconds for the message to appear.
Note: You can change these settings again at any
time in the basic settings.
~"
Basic settings" on page 19
Set language
The language appears first. The language
“Deutsch” is set by default.
1. Set the desired language with the control ring.
2. To confirm on field s tip. The
following setting appears.
Setting time
The time starts at “12:00 AM”.
1. Set the time with the control ring.
2. To confirm on the field s tip.
An indication appears on the display that the first use has
been completed. The current time is displayed
displayed.
Cleaning the interior and accessories
Before preparing food with the appliance for the first
time, clean the interior and the accessories.
Cleaning the interior
To remove the smell of the new, warm up the empty,
closed interior space.
Make sure that there are no packaging residues, such as
granules of Styrofoam, in the interior and remove self-
adhesive tape in or near the interior. Before heating up,
wipe the smooth surfaces in the cooking compartment
with a soft, damp cloth. Make sure the kitchen is
ventilated while the appliance is heating up.
Make the specified settings. In the next chapter you can
read how to set a heating method and temperature. ~"
Operate device"
on page 15
Settings
heating me-
method
4D hot air <
Temperature
Length of time
maximum
1 hour
14
To Next Page
Loading...
