NL racks
pracks
Hanging racks
The racks only fit left or right. With both racks, make
sure that the bent rods are at the front.
stretch youWhen properly maintained and cleaned, your
appliance will continue to look good and function
properly for a long time to come. Here we explain how
to remove and clean the racks.
1. Insert the rack first in the middle of the rear bus ,
until it abuts the wall of the cooking compartment,
then push it back (Fig. !).
2. Then insert the rack into the front bus „, until it also
connects to the wall of the
interior space, and press down ... (Fig. ").
Remove and attach racks
:Warning – Risk of burns!
The racks get very hot. Never touch the hot racks.
Always allow the appliance to cool down. Make
sure there are no children around.
Remove racks
qappliance door
1. Raise the rack at the front a little s and delete (Fig. !).
2. Then pull the entire rack forward and take it out
(Fig. ").
Device doorWhen properly maintained and cleaned, your appliance
will continue to look good and function properly for a long
time to come. Here we explain how to
to remove and clean the appliance door.
Remove and insert appliance door
To clean and disassemble the door windows, you can
remove the appliance door.
The hinges of the appliance door are all fitted with a
locking lever.
When the locking levers are closed (Fig. !), the appliance
door is secured. He cannot be removed.
When the locking levers for removing the appliance
door are folded open (Fig. "), the hinges are secured
and cannot be closed.
Clean the racks with soapy water and a cleaning
sponge. Use a brush for stubborn dirt.
:Warning
Risk of injury!
■ If the hinges are not secured, they can close with
great force. Make sure that the locking levers are
always fully closed, or fully open when removing the
appliance door.
Risk of injury!
24
To Next Page
Loading...
