Bosch CLC6101i-W 50 HE - Page 53

6-2
Climate Class 6100i / 6000i / 8100i / 8000i
6) Remove Horizontal Louver
(H-louver)
.
- Take the center Bearing out.
- Take the left side Louver Bushing out.
-Take the Horizontal Louver
(H-louver)
out.
7) Remove 2 screws xing the Front Panel.
Pull the top side of Front Panel to release the hooks.
Pull this side to release these hooks.
Press below position to unfasten the hooks in side of Front
Panel, then take the Front Panel out.
8) Cut the Wire Fixing Band and remove the Thermistor.
(CLC6001i-W 25/35 E, CLC6101i-W 50 HE)
(CLC8101i-W 65 HE(R/S/T), CLC8001i-W 25/35 E(R/S/T))
(CLC6101i-W 65 HE)