6-3
Climate Class 6100i / 6000i / 8100i / 8000i
9) Remove 2 screw xing the Ground wire.
10) Take off the Contorl Box Cover.
11) Cut the wire xing band and remove all the connectors.
12) Remove 1 screw, then rotate the Control Unit as below to take
it out.
13) Cut the Wire Fixing Band and remove the Thermistor.
(CLC8101i-W 65 HE(R/S/T), CLC8001i-W 25/35 E(R/S/T))
(CLC6101i-W 65 HE)
14) Use a pincer to press the 4 spacer into the Control Angle to
remove the PWB.
15) Remove PCI UNIT.
(CLC8101i-W 65 HE(R/S/T), CLC8001i-W 25/35 E(R/S/T))
- Press the hook to rotate the PCI LOCK
To Next Page
Loading...
