6-4
Climate Class 6100i / 6000i / 8100i / 8000i
- Slide the PCI cover to right side, then lift it to take it out
- Release the hook of Stabilizer R&L Ass’Y, rolate Stabilizer R&L Ass’Y
out.
- Loose the screw of the PCI JOINT PWB UNIT B, take the PWB out.
(CLC6001i-W 25/35 E, CLC6101i-W 50/65 HE)
- Release the hook of PCI Cover
- Take PLASMACLUSTER Unit out. Then remove the connecter.
16) Remove Center LED UNIT.
- Release the hook of Stabilizer R Ass’Y, rolate Stabilizer R Ass’Y out.
- Release a hook, take out the LED CASE, then take the center LED
CASE out.
- Press the hook, take out the PCI LED UNIT.
- Unfold the LIGHT GUIDE COVER, take out the LIGHT GUIDE.