6-5
Climate Class 6100i / 6000i / 8100i / 8000i
17) Remove the screw of Louver Motor, then take the Motor out.
18) Release Arm Auto/Manual from Louver Link R.
19) Remove the screw of Bracket, and take Bracket out.
20) Remove the 2 screws of Louver Motor V to take the motor
out.
21) Remove 2 screw xing the Fan Motor Cover, then remove
Fan Motor Cover.
22) Remove 1 screw between Cross Flow Fan and Fan Motor.
23) Hold and press the Cross Flow Fan to left side as much as
possible, meanwhile, take Fan Motor out.
24) Remove a screws of Side Cover R.
25) Remove 2 screws xing Side Cover L.
To Next Page
Loading...
