6-12
Climate Class 6100i / 6000i / 8100i / 8000i
Disassemble the screw fixing control box ass’y.(1 screw). 12）9)
Pull down the terminals connecting the electric box substrate.
Take out the thermistor lead wire from guide groove.
10)
Cut the wire fixing band fixing the transfer connector of
the compressor and
control box ass’y, then disassemble
the terminal of reactor and compressor, after all, disasse-
mble control box ass’y.
11)
Remove compressor cover.(1 pcs)
13）Disassemble Bulkhead ass’y.(2 screws)
14）Remove remain cover and compressor cover.(4 pcs )
(Disassemble the control box ass’y)
(Method of remove compressor cover)
(Method of assemble cover)
To Next Page
Loading...
