6-13
Climate Class 6100i / 6000i / 8100i / 8000i
Disassemble compressor terminal cover.(1 nut)
Then disassemble the compressor connecting terminal.
Disassemble thermistors(4 pieces) and thermistor clamps(1 piece) .
(thermistor clamps)
Disassemble propeller fan and fan motor.(1 nut,4 screws)
2.Electrical parts exchange methods of outdoor
control box unit.
Disassemble fan motor angle ass’y.(2 screws)18)
Disassemble fan motor angle.(2 screws)19)
Cut the fixing band.(1 pcs)1)
Disassemble lead wire connected with terminal board.(5 pcs)2)
Disassemble terminal board, if terminal board broken.(1 screw)3)
15)
16)
17)
Compressor：GMCC
To Next Page
Loading...
