6 720 821 651 (2017/05)CRC200
Service menu | 25
8.5 Maintenance menu
Service-relevant settings are made in this menu, e. g. deleting
the list of faults after all faults have been rectified in the course
of service.
If the service display is set directly at the heat source on the
basis of the run time or burner hours, the setting
Maint.message appears under ON, but the Maint. date
cannot be set.
8.6 System info menu
Detailed information about the BUS users in the system can be
queried in this menu. No changes can be made.
Menu item default
settings
Control range Functional description
Maint.message OFF ON | OFF Maint.message is not available for heating zone 1.
No service display appears on the user interface.
A service display appears on the screen of the user interface on the set date
( Maint. date).
Maint. date 01/01/2012 –
12/31/2099
Date for next heating system maintenance. (only for heating zone 1)
Reset Maint. NO NO | YES Reset Maint. is not available for heating zone 1.
The service display is not reset.
The service display is reset.
Current Fault e. g. 09/29/
2014
A11/802
All current faults are displayed, arranged in order of fault severity: the fault date
appears in the text line, the fault code and sub-code flash alternately in the
value display.
Fault History e. g. 07/31/
2014
A02/816
The last 20 faults are displayed, arranged in order of the time of occurrence.
The fault date appears in the text line, the fault code and sub-code flash
alternately in the value display.
Clear Fault NO ON | OFF The fault history is retained.
The fault history is deleted.
Table 11 Settings in the maintenance menu
Menu item Display example Functional description
Install.date 09/14/2014 The date of the first confirmed configuration is recorded automatically.
Control unit xxx.x Designation of the heat source controls
Control SW 1.xx Software version of the heat source controls
2.xx
SW controller NFxx.xx User interface software version
HC Module SW NFxx.xx CZM100 software version
1)
1) Not available if a corresponding module is installed.
Table 12 System info
To Next Page
Loading...
