Control unit
CS3000 AWP – 6721852570 (2023/04)
60
Fig. 85
TIMER menu - DAILY TIMER
• Press or to select timer 1 or timer 2
• When the cursor is over ACT press or to select ON/OFF
• Select the start time, end time, mode, temperature to be set by press
or
• Press or to adjust the time, as well as the mode, and the
temperature value
• When the cursor is over SILENT MODE press or to set the
silent, standard, night silent or super silent modes
• Press OK to confirm or BACK to cancel
• The timer on symbol appears on the main screen
Fig. 86
Fig. 87
If two time slots overlap, the last one on the lists is activated (in figure
below - OFF)
Fig. 88
TIMER menu - WEEKLY TIMER
• The weekly timing and the weekly timing switch can be selected by
and , and Monday to Sunday can be selected by and
Fig. 89
• Select WEEKLY SCHEDULE by and , select the day to be set by
and ; press ENTER to enter Sunday timing
• Use and to switch the cursor to DAILY TIMER, ACT, TIME ON;
TIME OFF, MODE, TWS, SILENT MODE
•When the cursor is at DAILY TIMER, use and to select Timer 1
or Timer 2 to be set
• When the cursor is at ACT use the ON/OFF key to select ON or OFF
• Use and to select the start time, end time, mode, and
temperature to be set, and the use and to adjust the time,
mode, and temperature values
• When the cursor is in SILENT MODE, select different silent modes
through and
• After setting, press ENTER to confirm and save, press BACK to cancel
the setting and return to previous page
• The WEEKLY TIMER ON symbol appears on the main screen
To Next Page
Loading...
