Digital Video Recorder 440/480 Series Configuration menu | en 67
Bosch Security Systems Installation and Operation manual AM18-Q0605 | v2.0 | 2012.04
6.5.3 Connecting using a smart mobile phone
Your smart phone should support RTSP network protocol and includes a RTSP capable player
application that can display H.264 video streams. The RTSP transports the remote (network)
stream or the local recording stream if the remote stream is disabled.
Performance depends on the decoding performance of mobile device. Streaming may fail if
the bandwidth of the internet connection is too low.
You can connect to the DVR 600 to view one live-view channel as follows:
1. Enable RTSP On in Network-TCP/IP menu for DVR 600.
2. Set the DVR IP address in DHCP or enable static IP for DVR 600.
3. Input the following on the smart phone.
– rtsp:// xxx.xxx.xxx.xxx/cgi-bin/rtspStream/1
4. If the RTSP port is not the default port (554), use the following on the smart phone.
– rtsp://xxx.xxx.xxx.xxx:firewall open port/cgi-bin/rtspStream/1
Note:
xxx.xxx.xxx.xxx is the DVR IP address; 1 refers to channel 1, 2 refers to channel 2, etc.
To Next Page
Loading...
